Fix Your Stuff Community Store

KYVOL CYBOVAC E20 Main Brush Replacement

Introduction

The Kyvol Cybovac E20 has a main rolling brush that may stop functioning over time from use. The brush should be taken out and cleaned, but if this does not work, the brush may be broken. If your vacuum is not cleaning well, use this guide to replace a broken main brush.

  1. KYVOL CYBOVAC E20 Main Brush Replacement, Main Brush: step 1, image 1 of 1

    • Turn vacuum off and lay on flat surface.

    Edit

  2. KYVOL CYBOVAC E20 Main Brush Replacement: step 2, image 1 of 2 KYVOL CYBOVAC E20 Main Brush Replacement: step 2, image 2 of 2

    • Turn vacuum over and identify the main brush compartment.

    Edit

  4. KYVOL CYBOVAC E20 Main Brush Replacement: step 3, image 1 of 1

    • Take off the orange cover guarding the brush

    Edit

  5. KYVOL CYBOVAC E20 Main Brush Replacement: step 4, image 1 of 1

    • Remove the main brush from the vacuum by pulling it out.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 2 other contributors

Hailee Ledgerwood

Member since: 02/09/23

109 Reputation

1 Guide authored

Badges: 3

Team

University of North Texas, Team 2-5, Saru Jimmy Spring 2023 Member of University of North Texas, Team 2-5, Saru Jimmy Spring 2023

UNT-SARU JIMMY-S23S2G5

4 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 141