Introduction

The presser foot is one of the most important parts of the sewing machine. This guide shows you how to replace different presser feet on the Juki DDL-8700.

Parts

Image 1/1: Unthread the needle.
  • Make sure to turn off the machine before replacing the presser foot.

  • Unthread the needle.

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • Roll the hand wheel on the right side of the machine to raise the needle up.

Add Comment

Image 1/2: Image 2/2:
  • Pull up the switch to raise the presser foot.

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • Use a screwdriver to disassemble the presser foot.

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • Use the screwdriver to assemble the new presser foot.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Ada Lee

Member since: 04/28/2017

107 Reputation

1 Guide authored

Team

UC Davis, Team S3-G5, Coad Spring 2017 Member of UC Davis, Team S3-G5, Coad Spring 2017

UCD-COAD-S17S3G5

3 Members

1 Guide authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 4

Past 30 Days: 11

All Time: 74