Jolie Shower Filter Head Replacement
Madison Spurlin and one other contributor
Last updated on Jan 8, 2026
Views: 1.3K
View statistics:
- Past 24 Hours:
- 3
- Past 7 Days:
- 37
- Past 30 Days:
- 174
- All Time:
- 1,263
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓Hi!
this is a simple step by step guide on how to replace your own Jolie shower filter!
What you need
Tools
-
-
-
Use an adjustable wrench or pliers to loosen the old shower head by turning it counterclockwise. Wrap the fixture with a soft cloth to avoid scratching it while using tools.
-
-
-
Wrap 2–3 layers of Teflon tape around the shower arm threads in a clockwise direction to ensure a tight, leak-free seal.
-
-
-
-
Screw the new Jolie filter shower head onto the shower arm by hand, turning clockwise. Use a wrench for a final snug fit if needed, being careful not to overtighten.
-
-
-
Turn on the water and check for leaks around the connection. If leaks appear, tighten slightly or reapply Teflon tape. Test the water flow to ensure the new shower head is secure and functioning properly.
-
Ask FixBot
Team
Austin Community College, Team 2-14, Tijerina Fall 2025 Member of Austin Community College, Team 2-14, Tijerina Fall 2025
AUSTINCC-TIJERINA-F25S2G14
1 Member
12 Guides authored
