Introduction

The LCD Screen on the GR-D93U is where the viewer can see the video that is being recorded and is where the playback is displayed. It is important to have the screen and can be frustrating if the screen is cracked or won't display content. The process of replacing the screens involves unscrewing a lot of screws so have a place that you will be able to keep the screws.

Unscrew 3 mm Phillips #0 screws around the LCD Screen. You will have to turn the screen to get the screws on the bottom of the screen. Unscrew 3 mm Phillips #0 screws around the LCD Screen. You will have to turn the screen to get the screws on the bottom of the screen. Unscrew 3 mm Phillips #0 screws around the LCD Screen. You will have to turn the screen to get the screws on the bottom of the screen.
  • Unscrew 3 mm Phillips #0 screws around the LCD Screen. You will have to turn the screen to get the screws on the bottom of the screen.

Add Comment

Pry apart the plastic casing around the screen using a flat spudger tool
  • Pry apart the plastic casing around the screen using a flat spudger tool

Add Comment

Black Friday
Broken doesn't stand a chance.
Carefully remove the wires connected to the screen from the black box. Now you will be able to separate the screen from the camera. Carefully remove the wires connected to the screen from the black box. Now you will be able to separate the screen from the camera.
  • Carefully remove the wires connected to the screen from the black box. Now you will be able to separate the screen from the camera.

Add Comment

Unscrew the 5 mm Phillips #0 screw that is connecting the screen to the plastic casing. Unscrew the 5 mm Phillips #0 screw that is connecting the screen to the plastic casing.
  • Unscrew the 5 mm Phillips #0 screw that is connecting the screen to the plastic casing.

Add Comment

You can now take out the screen to be replaced. Carefully remove cables from the data board. You can now take out the screen to be replaced. Carefully remove cables from the data board. You can now take out the screen to be replaced. Carefully remove cables from the data board.
  • You can now take out the screen to be replaced. Carefully remove cables from the data board.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Lindsay

Member since: 03/16/2015

213 Reputation

2 Guides authored

Team

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 2

Past 30 Days: 10

All Time: 141