Introduction

Every JD Razor 2000 has two wheels, the Front Wheel which is located directly underneath the handlebar, and the Back Wheel which is located underneath the wheelie bar. The JD Razor 2000 guide provides instructions for the replacement of the Back Wheel.

Parts

Facing the wheelie bar as shown, place your left thumb on the bolt located on the left side of the Back Wheel and place the Allen wrench into the screw on the right side of the Back Wheel. Using the wrench, slowly unscrew the bolt while applying constant pressure from the left side.
  • Facing the wheelie bar as shown, place your left thumb on the bolt located on the left side of the Back Wheel and place the Allen wrench into the screw on the right side of the Back Wheel.

  • Using the wrench, slowly unscrew the bolt while applying constant pressure from the left side.

Add Comment

Black Friday
Broken doesn't stand a chance.
Remove the bolt from the right side and the bearing from the left. Remove the bolt from the right side and the bearing from the left.
  • Remove the bolt from the right side and the bearing from the left.

Add Comment

Turn the JD Razor 2000 on its side as shown. Slowly remove the Back Wheel by pulling it out at a perpendicular angle to the scooter base.
  • Turn the JD Razor 2000 on its side as shown. Slowly remove the Back Wheel by pulling it out at a perpendicular angle to the scooter base.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Eric Johnson

Member since: 10/17/2014

209 Reputation

1 Guide authored

Team

Cal Poly, Team 4-46, Amido Fall 2014 Member of Cal Poly, Team 4-46, Amido Fall 2014

CPSU-AMIDO-F14S4G46

4 Members

8 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 7

All Time: 288