Parts

No parts required.

Image 1/3: Image 2/3: Image 3/3:
  • Using a pry opening tool, pry into the speaker grill covering as seen in the photos.

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • Continue to pry open the grill all the way around until it can be removed from the unit itself as seen in the pictures.

Add Comment

Image 1/1:
  • Remove all 8 speaker screws using a Philips 00 screwdriver.

Add Comment

Image 1/2: Image 2/2:
  • Using a pry tool, remove speakers from housing as seen in the picture.

Add Comment

Image 1/2: Image 2/2:
  • Using tweezers, carefully remove both side speakers from the motherboard as shown in the pictures.

Some do not have a snap on cable. I did this and it rip the prongs out of the board.

Todd - Reply

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 other people completed this guide.

Faizan Naveed

Member since: 04/12/2017

1,388 Reputation

8 Guides authored

Team

Mobile Device Repair Factory Member of Mobile Device Repair Factory

Business

1 Member

8 Guides authored

2 Comments

where did you aquire the replacement drivers?

djbadandy - Reply

where did you get the drivers from?

Rashid Saad Siddiqui - Reply

Add Comment

View Statistics:

Past 24 Hours: 16

Past 7 Days: 95

Past 30 Days: 359

All Time: 1,410