Fix Your Stuff Community Store

JBL Everest Elite 300 Headphone Jack Replacement

Introduction

Headphones not connecting to the auxiliary? This may be caused by the headphone jack. Here's a guide to replace it. All you will need is a Phillips #00 screwdriver, a soldering iron, and an iFixit opening tool.

What you need

  1. JBL Everest Elite 300 Headphone Jack Replacement, Speaker: step 1, image 1 of 1

    • Remove the ear pad with an opening pick.

    Edit

  2. JBL Everest Elite 300 Headphone Jack Replacement: step 2, image 1 of 1

    • Reveal the speaker.

    Edit

  4. JBL Everest Elite 300 Headphone Jack Replacement: step 3, image 1 of 1

    • Remove the 4.5 mm screws using the Phillips #00 screwdriver.

    Edit

  5. JBL Everest Elite 300 Headphone Jack Replacement: step 4, image 1 of 1

    • Pull apart the bronze speaker away from the headphones carefully to reveal the wiring.

    • Desolder the motherboard speaker connection.

    Edit

  6. JBL Everest Elite 300 Headphone Jack Replacement, Headphone Jack: step 5, image 1 of 1

    • Unscrew the circuit board connected to the headphone jack.

    Edit

  7. JBL Everest Elite 300 Headphone Jack Replacement: step 6, image 1 of 1

    • Desolder the cables connecting the headphone jack board to the headphones.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 5

All Time: 49