Put in the wisdom here.
  • Put in the wisdom here.

Add Comment

Put in the wisdom here.
  • Put in the wisdom here.

Add Comment

  • Put in the wisdom here.

Add Comment

  • Put in the wisdom here.

Add Comment

  • Put in the wisdom here.

Add Comment

  • Put in the wisdom here.

Add Comment

  • Put in the wisdom here.

Add Comment

  • Put in the wisdom here.

Add Comment

  • Put in the wisdom here.

Add Comment

  • Put in the wisdom here.

Add Comment

  • Put in the wisdom here.

Add Comment

  • Put in the wisdom here.

Add Comment

  • Put in the wisdom here.

You do not need the steps 13 -15 as it is possible to unplug de flex with the bottom PCB still installed.

For this I removed the speaker cable for better access.

But you’ll need long pliers and patience to plug it back in

Martin Stegmann - Reply

  • Put in the wisdom here.

Add Comment

  • Put in the wisdom here.

Add Comment

  • Put in the wisdom here.

Add Comment

  • Put in the wisdom here.

Add Comment

  • Put in the wisdom here.

On the first picture above, what is the object with the number 100 on it, what is its function and how do I replace/attach it if it came loose?

brenbampton411 - Reply

Conclusion

To reassemble the device, follow these instructions in reverse order.

6 other people completed this guide.

Special thanks to these translators:

100%

These translators are helping us fix the world! Want to contribute?
Start translating ›

Pavel Amelyanenka

Member since: 11/05/2016

251 Reputation

2 Guides authored

8 Comments

Great. Thanks to your help I got my JBL back. Thank you and I hope you continue to help other people.

Heitor BC - Reply

AWESOME! Glad to hear, it was helpful.

irlanda -

So our speaker hit the ground and that little piece with the 100 on it has separated from the motherboard. Is there anyway to fix that without replacing the whole thing?

somer.yocom - Reply

Yes, this is not a problem. It is enough to solder this part into place. And everything will work perfectly.

Pavel Amelyanenka -

привет павел, у меня тоже есть такой проблем. мой синок удалил на полу мой jbl. и ето маленкой деталь 100 развалился. но я и потерял етот деталь. если у тебе ест информация скажи пожалуйста точное име деталь 100 которий находится на верху интегральной схеми ( 100 написано с белие цифри)спасибо

Илко Маринов - Reply

My one was on charging and something happened it still works but sound is very very low .. U need to put that next to ur ear to listen .. I opened that and found the near the speaker connector(on the left side corner) the board is hot… what to do

Soni - Reply

Hi.

Specify in the photo the most precisely the place of heating.

Pavel Amelyanenka -

Add Comment

View Statistics:

Past 24 Hours: 9

Past 7 Days: 74

Past 30 Days: 361

All Time: 4,179