Polar M400 Watch Wrist Strap Replacement
Timothy Rocha and 2 other contributors
Last updated on May 7, 2024
Views: 11K
View statistics:
- Past 24 Hours:
- 3
- Past 7 Days:
- 17
- Past 30 Days:
- 124
- All Time:
- 11,296
Comments: 4
2 comments on steps, 2 guide comments.
Go to guide commentsCompleted: 6 7
6 people have marked this guide "completed." Will you be next?
7 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓This guide will teach someone how to take off a damaged or torn wrist strap on the Polar M400 and replace it with a new one. A damaged wrist strap could be due to excessive wear and tear or wearing it in wet conditions.
What you need
Parts
Tools
-
-
-
Insert a standard paper clip into the holes on both sides of the watch that connect the watch's face with the wrist strap.
Ask FixBot
-
-
Tool used on this step:Tweezers$4.99
-
Apply an upward pressure to the holes until the locking pins release.
-
Use precision tweezers to remove the pins that connect the face with the strap.
-
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
6 other people completed this guide.
Team
University of Maine, Team S1-G3, Diaz Fall 2017 Member of University of Maine, Team S1-G3, Diaz Fall 2017
UMAINE-DIAZ-F17S1G3
4 Members
36 Guides authored
2 Guide Comments
I am trying to do the same on my Polar v800 and I cannot remove the locking pins, they seem to be “stuck”, any idea how to loosen them?
Polar won’t sell spare parts so where can I buy a replacement screen or a replacement front case for the M430?
