Instant Pot Smart-60 Anti-Block Shield Replacement
Anya (Anna) Houk and 2 other contributors
Last updated on Mar 23, 2018
Views: 2.3K
View statistics:
- Past 24 Hours:
- 3
- Past 7 Days:
- 25
- Past 30 Days:
- 117
- All Time:
- 2,282
Comments: 1
1 guide comment.
Go to guide commentsCompleted: 2 3
2 people have marked this guide "completed." Will you be next?
3 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓The anti-block shield prevents little bits of food from clogging up the pressure release valve. It must be removed and cleaned after every use. This guide will demonstrate how to remove the anti-block shield on the device.
What you need
Tools
-
-
-
Open the lid of the Instant Pot. Grasp the handle and rotate the lid counter-clockwise, then lift up to separate the lid from the base.
-
Turn the lid upside down to access the anti-block shield.
Ask FixBot
-
-
-
Wedge the iFixit opening tool between the anti-block shield and the underside of the lid.
-
Push down on the opening tool until the anti-block shield pops out.
-
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Team
Cal Poly, Team S1-G4, Livingston Winter 2018 Member of Cal Poly, Team S1-G4, Livingston Winter 2018
CPSU-LIVINGSTON-W18S1G4
4 Members
72 Guides authored
