Introduction

How to replace the float valve on the Instant Pot IP-DUO. This procedure and part is the same for the following models: IP-DUO50, IP-DUO60, and the IP-DUO80.

Tools

No tools required.

Parts

  1. Remove the lid by twisting it counter-clockwise. Remove the lid by twisting it counter-clockwise. Remove the lid by twisting it counter-clockwise.
    • Remove the lid by twisting it counter-clockwise.

  2. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  3. Place the lid upside down on a stable surface.
    • Place the lid upside down on a stable surface.

  4. Remove the white rubber cover from the red float valve by pulling it off gently. The red float valve will fall once the white cover is removed. The red float valve will fall once the white cover is removed.
    • Remove the white rubber cover from the red float valve by pulling it off gently.

    • The red float valve will fall once the white cover is removed.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Kayla Meacham

Member since: 01/23/2018

570 Reputation

5 Guides authored

Team

Cal Poly, Team S18-G2, Livingston Winter 2018 Member of Cal Poly, Team S18-G2, Livingston Winter 2018

CPSU-LIVINGSTON-W18S18G2

4 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 4

Past 7 Days: 23

Past 30 Days: 120

All Time: 1,681