Introduction

Providing information to disassemble the phone and replace the screen.

Image 1/3: Remove the battery from the casing. This is simply a precaution. Image 2/3: Turn the phone over so that the front side is facing you. Flip open the device in preparation for the next step. Image 3/3: Turn the phone over so that the front side is facing you. Flip open the device in preparation for the next step.
  • Lift the bottom of the phone's back cover upwards, revealing the phone's battery housing.

  • Remove the battery from the casing. This is simply a precaution.

  • Turn the phone over so that the front side is facing you. Flip open the device in preparation for the next step.

Add Comment

Image 1/3: Using the Tri-Wing Y0 screwdriver, remove the two screws from the screen. Image 2/3: Using the Tri-Wing Y0 screwdriver, remove the two screws from the screen. Image 3/3: Using the Tri-Wing Y0 screwdriver, remove the two screws from the screen.
  • Peel the Virgin Mobile sticker from the phone's screen, revealing two screws beneath it.

  • Using the Tri-Wing Y0 screwdriver, remove the two screws from the screen.

Add Comment

Image 1/3: After lifting the plastic cover from the screen, remove the two screws from the metal cover holding the screen in place. Image 2/3: After lifting the plastic cover from the screen, remove the two screws from the metal cover holding the screen in place. Image 3/3: After lifting the plastic cover from the screen, remove the two screws from the metal cover holding the screen in place.
  • Lift the plastic cover of the phone screen upwards by prying around the perimeter of the screen with a plastic opening tool.

  • After lifting the plastic cover from the screen, remove the two screws from the metal cover holding the screen in place.

Add Comment

Image 1/1:
  • Remove metal cover by lifting up and away from the device.

Add Comment

Image 1/3: Use your fingernail to detach the ribbon connecting the board to the screen. Image 2/3: Remove the damaged screen from the device. Image 3/3: Remove the damaged screen from the device.
  • Remove the phone's speakers by using the plastic opening tool to pry up and away from the device. These speakers will dangle by the wires attached to the board.

  • Use your fingernail to detach the ribbon connecting the board to the screen.

  • Remove the damaged screen from the device.

Add Comment

Image 1/1:
  • Follow steps in reverse order to replace Kyocera Oystr’s screen.

Add Comment

David

Member since: 10/04/2011

24 Reputation

2 Guides authored

Team

UWSTOUT Member of UWSTOUT

ZHOU-F11S5G7

2 Members

2 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 9

All Time: 1,729