Skip to main content

PowerBook G4 Titanium DVI Keyboard Replacement

What you need

  1. PowerBook G4 Titanium DVI Keyboard Replacement, Battery: step 1, image 1 of 2 PowerBook G4 Titanium DVI Keyboard Replacement, Battery: step 1, image 2 of 2
    • Locate the battery release tab on the underside of the G4.

    • Slide the battery release tab to the left and lift the battery out of the computer.

  2. PowerBook G4 Titanium DVI Keyboard Replacement, Keyboard: step 2, image 1 of 1
    • Turn the keyboard locking screw located in the middle of the keyboard so that it is parallel to the space bar. A half turn from parallel to parallel will unlock it. Another half turn will lock it again.

    • Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free.

  3. PowerBook G4 Titanium DVI Keyboard Replacement: step 3, image 1 of 1
    • Rest the keyboard face down on the trackpad area.

    • Disconnect the keyboard connector from the logic board.

  4. PowerBook G4 Titanium DVI Keyboard Replacement: step 4, image 1 of 1
    • Your laptop should look approximately like this.

Conclusion

To reassemble your device, follow these instructions in reverse order.

8 other people completed this guide.

Attached Documents

iRobot

Member since: 09/24/09

1 Reputation

636 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 3

Past 7 Days: 4

Past 30 Days: 13

All Time: 10,639