Introduction

Hate the look of halogen bulbs? Get rid of the dull yellow with a new set of LED license plate lights. Installation is very easy and will only take you a few minutes.

Tools

Parts

No parts required.

  1. Take a flat head screwdriver and remove the license plate housing cover. Take a flat head screwdriver and remove the license plate housing cover.
    • Take a flat head screwdriver and remove the license plate housing cover.

  2. Remove the bulb housing.
    • Remove the bulb housing.

  3. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  4. Remove the stock license plate bulb. Remove the stock license plate bulb.
    • Remove the stock license plate bulb.

  5. Directly replace with the new LED license plate bulb. If it doesn't light up, flip the LED bulb 180 degrees. Directly replace with the new LED license plate bulb. If it doesn't light up, flip the LED bulb 180 degrees.
    • Directly replace with the new LED license plate bulb. If it doesn't light up, flip the LED bulb 180 degrees.

  6. Put everything back the same way it was removed. Put everything back the same way it was removed. Put everything back the same way it was removed.
    • Put everything back the same way it was removed.

Conclusion

You can see from these instructions that installation was very easy. Enjoy your new LED license plate lights.

5 other people completed this guide.

Eric Wu

Member since: 01/21/2015

2,582 Reputation

23 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 4

Past 30 Days: 16

All Time: 1,033