Skip to main content

Fix Your Stuff

Right to Repair

Store

Introduction

The Insignia 2-in-1 Handheld/Stick vacuum brush bristles can become worn down from continuous use. The bristles in the head might get damaged and need replacement, or the head might become obstructed with debris. Use this guide to help replace the brush head in the event of imperfect performance.

Parts

No parts specified.

  1. Unscrew the single 12.0 mm Phillips #2 screw on the right side of the bottom of the vacuum head. Lift and pull up on the brush retention clip. Pull brush up and out to remove.
    • Unscrew the single 12.0 mm Phillips #2 screw on the right side of the bottom of the vacuum head.

    • Lift and pull up on the brush retention clip.

    • Pull brush up and out to remove.

  2. SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits

    SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits
Conclusion

To reassemble your device, follow these instructions in reverse order.

Thibaut Pillot

Member since: 02/15/2018

434 Reputation

5 Guides authored

Team

USF Tampa, Team S16-G3, Boczar Spring 2018 Member of USF Tampa, Team S16-G3, Boczar Spring 2018

USFT-BOCZAR-S18S16G3

4 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 75