Introduction

The antenna is a very important component for the radio of the Insignia NS-B2110. Antennas may snap or break, causing the radio to stop working. Removing the antenna is a fairly easy and quick fix.

Parts

No parts required.

  1. On the backside of the device, lift the plastic handle up with your hands to reveal the antenna.
    • On the backside of the device, lift the plastic handle up with your hands to reveal the antenna.

    • Lift the antenna to its upright position.

    Add Comment

  2. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
  3. Remove one 6.0 mm Phillips #00 screw from the base of the antenna.
    • Remove one 6.0 mm Phillips #00 screw from the base of the antenna.

    • Remove the antenna from the metal bracket.

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Daniel Hodges

Member since: 10/14/2013

301 Reputation

3 Guides authored

Team

Cal Poly, Team 4-31, Amido Fall 2013 Member of Cal Poly, Team 4-31, Amido Fall 2013

CPSU-AMIDO-F13S4G31

4 Members

8 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

All Time: 463