Skip to main content

Introduction

The disassembling of the monitor is so to be able to change the screen or replace other components of the monitor.

  1. Start by gently inserting the plastic opening tool between the led and casing.
    • Start by gently inserting the plastic opening tool between the led and casing.

  2. Slowly pry the cover away from the bottom using the plastic opening tool.
    • Slowly pry the cover away from the bottom using the plastic opening tool.

  3. Glide the tool around the entire cover to reveal the screws, which are 5.0 mm.
    • Glide the tool around the entire cover to reveal the screws, which are 5.0 mm.

  4. Remove the cover and set it aside.
    • Remove the cover and set it aside.

  5. Remove the four corner screws, 5.0 mm, using a J1 bit. Lift the top away from the bottom using the metal spudger. Be careful not to rip the antenna wire.
    • Remove the four corner screws, 5.0 mm, using a J1 bit.

    • Lift the top away from the bottom using the metal spudger. Be careful not to rip the antenna wire.

Conclusion

To reassemble your device, follow these instructions in reverse order.

6 other people completed this guide.

Larsha Johnson

Member since: 08/26/2015

478 Reputation

3 Guides authored

Team

USF Tampa, Team 6-4, Remmell Fall 2015 Member of USF Tampa, Team 6-4, Remmell Fall 2015

USFT-REMMELL-F15S6G4

4 Members

3 Guides authored

2 Comments

What is the part number for the LCD?

jstarion - Reply

From the pictures LQ035NC111 seem to be the part number.

Michael C -

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 5,819