Skip to main content

Fix Your Stuff

Right to Repair

Store

Introduction

Replace the antenna to receive better signal.

Parts

No parts specified.

  1. At the top right, the insulated wire exposes the antenna.
    • At the top right, the insulated wire exposes the antenna.

  2. Locate antenna connection. Desolder wire to remove.  An antenna of a new length can be soldered to the board for improved signal strength.
    • Locate antenna connection.

    • Desolder wire to remove. An antenna of a new length can be soldered to the board for improved signal strength.

    • Be careful when using soldering iron.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Larsha Johnson

Member since: 08/26/2015

478 Reputation

3 Guides authored

Team

USF Tampa, Team 6-4, Remmell Fall 2015 Member of USF Tampa, Team 6-4, Remmell Fall 2015

USFT-REMMELL-F15S6G4

4 Members

3 Guides authored

2 Comments

That’s fine but what antenna did you purchase? My antennae wire is actually broken, started out with the plastic piece breaking then the cable snapped.

Henry Scharf - Reply

I would also like to know what replacement antenna you used.

stilesmccauley -

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 2

Past 30 Days: 39

All Time: 6,313