Parts

No parts required.

Introduction

Ensure that the camera unit is unplugged prior to starting this guide.

Secure screws to avoid losing them.

Screws are small and can pose a possible choking hazard for small children.

Image 1/2: Image 2/2:
  • Using a Phillips #2 screwdriver, remove the four, 6.0 mm Phillips screws from the back of the camera unit.

Add Comment

Image 1/2: Pull the ribbon straight out from the camera. Image 2/2: Pull the ribbon straight out from the camera.
  • Pull up on the two beige tabs to the left and right of the ribbon connected to the camera.

  • Pull the ribbon straight out from the camera.

Add Comment

Image 1/2: Image 2/2:
  • Remove the front face plate of the camera unit by carefully pulling it off.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Charles Neal

Member since: 08/31/2015

643 Reputation

5 Guides authored

Team

USF Tampa, Team 6-2, Remmell Fall 2015 Member of USF Tampa, Team 6-2, Remmell Fall 2015

USFT-REMMELL-F15S6G2

5 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 15

All Time: 502