Introduction

Ensure that the hand held monitor is off and unplugged prior to starting this guide. No tools are required for replacing the battery.

Press on the blue clip on the back and slide it down. In the second picture there is a slight gap at the top of the blue clip.
  • Press on the blue clip on the back and slide it down.

  • In the second picture there is a slight gap at the top of the blue clip.

Add Comment

Pull the blue clip away from the body of the hand held monitor.
  • Pull the blue clip away from the body of the hand held monitor.

Add Comment

Slide the rear white panel off as shown.
  • Slide the rear white panel off as shown.

Add Comment

Remove the battery by pushing in on the right side and then pulling the battery up and out of the body of the hand held monitor. Remove the battery by pushing in on the right side and then pulling the battery up and out of the body of the hand held monitor.
  • Remove the battery by pushing in on the right side and then pulling the battery up and out of the body of the hand held monitor.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Charles Neal

Member since: 08/31/2015

643 Reputation

5 Guides authored

Team

USF Tampa, Team 6-2, Remmell Fall 2015 Member of USF Tampa, Team 6-2, Remmell Fall 2015

USFT-REMMELL-F15S6G2

5 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 5

Past 30 Days: 16

All Time: 631