Introduction

Use this guide to replace a broken safety paddle on your ION electric ice auger.

  1. Before starting this repair, ensure that the battery has been removed from the power head.
    • Before starting this repair, ensure that the battery has been removed from the power head.

    • Removing the power head from the the auger makes manipulating the unit easier.

  2. On the inside of the trigger side grip, locate the 3 T10 torque screws recessed into the grip.
    • On the inside of the trigger side grip, locate the 3 T10 torque screws recessed into the grip.

  3. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  4. With a T10 torque screw driver, remove the 3 screws.
    • With a T10 torque screw driver, remove the 3 screws.

  5. Remove the outside half of the trigger side grip.
    • Remove the outside half of the trigger side grip.

  6. With a pair of needle nosed pliers, remove the safety paddle return spring.
    • With a pair of needle nosed pliers, remove the safety paddle return spring.

  7. Remove the broken safety paddle with your fingers.
    • Remove the broken safety paddle with your fingers.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Grant Larson

Member since: 04/26/2016

125 Reputation

1 Guide authored

Team

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 13

Past 30 Days: 68

All Time: 1,165