Introduction

Use this guide to replace the Wi-Fi Card of the IBM Thinkpad R40.

Parts

No parts required.

  1. Use a screwdriver to remove the screws located at the bottom of the laptop, covering the battery pack.
    • Use a screwdriver to remove the screws located at the bottom of the laptop, covering the battery pack.

    Add Comment

  2. Remove the battery from the laptop and place it to the side.
    • Remove the battery from the laptop and place it to the side.

    Add Comment

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Loosen the screw covering the Wi-Fi card panel.

    Add Comment

    • Open the now loosened section.

    • Release the clips that hold the Wi-Fi card in place.

    • Remove the Wi-Fi card.

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Erin

Member since: 09/08/2011

231 Reputation

2 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 3

Past 7 Days: 9

Past 30 Days: 23

All Time: 3,373