Parts

No parts required.

  1. Remove the screws shown. These screws are connected to the keyboard.
    • Remove the screws shown. These screws are connected to the keyboard.

  2. Take the spudger tool,  go around the edges of the oranges boxes shown, and pop off those two sections. Then, go around the edges of the keyboard, and it should slide off.
    • Take the spudger tool, go around the edges of the oranges boxes shown, and pop off those two sections. Then, go around the edges of the keyboard, and it should slide off.

  3. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  4. Lift and move keyboard aside to get to screws. Try not to remove the attached ribbon. Remove the screws shown. These screws will allow you to loosen the fan. Be careful since there is still another part connected.
    • Lift and move keyboard aside to get to screws. Try not to remove the attached ribbon.

    • Remove the screws shown. These screws will allow you to loosen the fan. Be careful since there is still another part connected.

  5. Carefully unplug the highlighted part, and your fan should come straight out.
    • Carefully unplug the highlighted part, and your fan should come straight out.

  6. The section in blue is where your new fan will go.
    • The section in blue is where your new fan will go.

Conclusion

To reassemble your device, follow these instructions in reverse order.

5 other people completed this guide.

Aaron

Member since: 03/12/2014

134 Reputation

1 Guide authored

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 20

All Time: 1,826