Introduction
This guide will assist in understanding the mechanics of the Hyundai Elantra 2012’s windshield wipers and how to remove/replace them.
Windshield wipers are needed to be replaced in order to properly drive during rainfall. With old windshield wipers, the windshield will be smudged due to the water not being properly removed.
The guide starts with removing each windshield wiper and then shows how to reattach them to the hooks. After completing all steps, the new wipers will be fully functional.
What you need
-
-
Raise the bigger arm and position the wiper blade so it is parallel to the arm.
Ask FixBot
-
-
-
Pull the wiper blade down towards the hood to release the wiper blade from the j-hook.
-
-
-
Push the new 28 inch wiper blade up into the j-hook until it makes an audible click.
-
-
-
-
Raise the smaller arm and position the wiper blade so it is parallel to the arm.
-
-
-
Pull the wiper blade down towards the hood to release the wiper blade from the j-hook.
-
-
-
Push the new 14 inch wiper blade up into the j-hook until it makes an audible click.
-
For a Hyundai Elantra 2012, replacing windshield wipers is quite easy and takes less than 5 minutes.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
University of North Texas, Team S1-G2, Raign Fall 2020 Member of University of North Texas, Team S1-G2, Raign Fall 2020
UNT-RAIGN-F20S1G2
2 Members
1 Guide authored
