Skip to main content

Introduction

In this guide we are going to replace the charging report on the Huawei ascend Y300 android smartphone. Before starting, it is a good idea to prepare an organized area to carry out the repair. It is also helpful to have a way of containing loose screws so they do not become lost.

  1. Remove the back panel. Remove the back panel.
    • Remove the back panel.

  2. Remove the battery.
    • Remove the battery.

  3. Use a T4 Torx screwdriver to remove the eight screws.
    • Use a T4 Torx screwdriver to remove the eight screws.

  4. Pry the screen from the  frame by utilizing a wedge. Avoid scratching the case.
    • Pry the screen from the frame by utilizing a wedge.

    • Avoid scratching the case.

  5. Use the tweezers to remove the vibrator from the device. Use the tweezers to remove the vibrator from the device.
    • Use the tweezers to remove the vibrator from the device.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cordell

Member since: 04/02/2019

124 Reputation

1 Guide authored

Team

IUPUI, Team S3-G5, Harley Spring 2019 Member of IUPUI, Team S3-G5, Harley Spring 2019

IUPUI-HARLEY-S19S3G5

3 Members

4 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 114