Introduction

This guide will demonstrate how to replace your watch's straps. Some of the tools used in this guide are relatively sharp, so make sure to use them with care.

Image 1/2: This will prevent the watch screen from suffering damage. Image 2/2: Obtain a Flex Extension with a Size 1.0 mm flat-head. In the case of not having said tool, for this model of watch one can use the hands to replace the strap.
  • Begin by laying the watch on a flat, smooth surface.

  • This will prevent the watch screen from suffering damage.

  • Obtain a Flex Extension with a Size 1.0 mm flat-head. In the case of not having said tool, for this model of watch one can use the hands to replace the strap.

Add Comment

Image 1/2: The watch comes with two of these springs on each side of the back-face. These are used to release the straps from the body of the watch. Image 2/2: The watch comes with two of these springs on each side of the back-face. These are used to release the straps from the body of the watch.
  • Locate the two springs on the back of your watch.

  • The watch comes with two of these springs on each side of the back-face. These are used to release the straps from the body of the watch.

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • Use the Flex Extension to push the spring to the right. This will release the strap from the watch head.

Add Comment

Image 1/1:
  • Carefully pull the strap away from the watch.

Add Comment

Image 1/2: Image 2/2:
  • Repeat step 3, this time using the other strap.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Alejandro Hernandez

Member since: 02/15/2017

114 Reputation

1 Guide authored

Team

USF Tampa, Team 5-3, Passmore Spring 2017 Member of USF Tampa, Team 5-3, Passmore Spring 2017

USFT-PASSMORE-S17S5G3

4 Members

3 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 5

Past 30 Days: 18

All Time: 171