Skip to main content

Shop the Holiday Gift Guide
Free Shipping on Domestic Orders $75+

Huawei P9 Back Cover

Views: 11K

View statistics:

Past 24 Hours:
7
Past 7 Days:
35
Past 30 Days:
150
All Time:
10,609
Comments: 25

24 comments on steps, 1 guide comment.

Go to guide comments
Completed: 8

8 people have marked this guide "completed." Will you be next?

Favorites: 1

1 person has favorited (and subscribed to) this guide. Will you be next?

Time Required: 45 minutes
Difficulty: Moderate
Huawei P9 Back Cover

Introduction

Go to step 1 ↓

Use this guide to open your Huawei P9 smartphone.

What you need

Tools

    1. Huawei P9 Back Cover, Back Cover: step 1, image 1 of 3 Huawei P9 Back Cover, Back Cover: step 1, image 2 of 3 Huawei P9 Back Cover, Back Cover: step 1, image 3 of 3
      • First switch off your phone and remove the SIM card tray.

      • Unscrew the two Pentalobe P2 screws located at the bottom next to the device's USB C port.

      • If the screen is cracked you might want to use some tape to protect your eyes from glass shreds and get a better grip to open the phone.

      Ask FixBot

      Add Comment

    2. Huawei P9 Back Cover: step 2, image 1 of 2 Huawei P9 Back Cover: step 2, image 2 of 2
      • Avoid to lift only the display instead of the whole phone assembly as doing so may cause damage to the screen.

      • Use an iSclack or a suction handle to separate the phone assembly from the rear panel.

      • In case you can‘t manage to lift the phone assembly out of the rear panel you can insert the pointed end of a spudger in the headphone jack opening and press the phone assembly upwards until you create a gap between assembly and rear panel. Then use the spudger to lever the phone assembly out of the panel.

      • Don't remove the rear panel completely yet. There is a cable connected to it! It is running from the finger print sensor to the display unit.

      Ask FixBot

      Add Comment

    3. Huawei P9 Back Cover, Fingerprint sensor: step 3, image 1 of 2 Huawei P9 Back Cover, Fingerprint sensor: step 3, image 2 of 2
      • Disconnect the fingerprint sensor using a spudger.

      Ask FixBot

      Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

8 other people completed this guide.

Author

with

Tobias Isakeit

Member since: 03/31/14

136,720 Reputation

189 Guides authored

Team

1 Guide Comment

I cant open the phone

Chizu - Reply Share

Add Comment

View Statistics:

Past 24 Hours: 7

Past 7 Days: 35

Past 30 Days: 150

All Time: 10,609