Introduction
How to disassemble Huawei P30 Pro an fix stuck in boot-loop problem.
Video Overview
Huawei P30 Pro boot loop solution
-
-
-
Warm up the device to soften the adhesive.
-
To separate the battery cover use plastic tools and a little isopropyl alcohol.
-
-
-
-
Remove the Phillips screws.
-
Remove the motherboard cover.
-
-
-
Disconnect the battery and the main flex cable.
-
Check the parts around the battery connector most probably damaged during previous repair.
-
Re-solder the resistors or solder new if someone missing or broken.
-
Ask FixBot
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Team
1 Guide Comment
Other places mention these resistors as 2 kOhm, both. Which value is correct ?
