This translation was generated by a machine and has not been reviewed by a person yet. Speak this language? Review it.
Huawei P20 Pro Rear Camera Lens Replacement
cPix and one other contributor
Last updated on Sep 2, 2026
Views: 61K
View statistics:
- Past 24 Hours:
- 5
- Past 7 Days:
- 21
- Past 30 Days:
- 106
- All Time:
- 60,931
Comments: 7
5 comments on steps, 2 guide comments.
Go to guide commentsCompleted: 20 21
20 people have marked this guide "completed." Will you be next?
21 people have marked this guide "completed." Including you — great job!
Favorites: 1 2
1 person has favorited (and subscribed to) this guide. Will you be next?
2 people have favorited (and subscribed to) this guide — including you!
Community-Contributed Guide
An awesome member of our community made this guide. It was not created by iFixit staff.
Introduction
Go to step 1 ↓If the rear camera's glass lens is broken on your Huawei P20 Pro, then you should replace that lens. This repair is simple but requires patience and precision. For the repair you will first have to remove the small pieces of shattered glass, then clean the area and glue the new lens with double-sided tape or simply by making 2 points of glue. The goal is to avoid touching or damaging the camera and avoid scratching it.
-
-
-
To replace the Huawei P20 Pro camera lens, place your phone on a clean, well-lit work surface. Wear safety glasses to protect your eyes.
Ask FixBot
-
-
-
Carefully remove the small pieces of broken glass using straight precision tweezers. You can slightly heat the area with a hair dryer to make it easier to remove.
-
-
-
Once the area is well cleaned, apply 2 dots of B7000 glue to the back and at each end of the new lens, or place 2 double-sided adhesive strips.
-
Reposition the replacement lens in the broken lens’ original location, being careful not to leave any marks or debris on the inside of the camera area.
-
-
-
After replacing the camera lens, clean it with a dry microfiber cloth.
Cancel: I did not complete this guide.
20 other people completed this guide.
Special thanks to these translators:
100%
These translators are helping us fix the world! Want to contribute?
Start translating ›
2 Guide Comments
Für das Erwärmen beim Lösen oder Anbringen des neuen Kameraglases mit Klebestreifen empfiehlt sich eine Wärmflasche. Klebereste lassen sich effektiv mit Alkohol, zum Beispiel Isopropanol, entfernen. Um die Sicht zu verbessern, können günstige Lesebrillen (+3 dpt) aus dem Supermarkt für wenige Euros als Lupe genutzt werden.
