Huawei P20 Pro Back Glass Replacement

Step 1 Back Glass

• Put your phone on a clean work surface with good lighting.
• If your back glass is shattered use clear tape to tape over the shattered glass. Use safety glasses to prevent your eyes from glass shards.
Translate
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 2

• Gently but firmly insert a thin iSesamo tool about an inch between the broken back glass and the frame.
• Do not insert the iSeasmo by the camera! There is a cable by the camera that may be cut if you insert the iSeasmo there!
• Slice all the way around the phone's edges to cut all of the adhesive.
• Do not slice around the camera area! There is a cable by the camera that may be cut if you slice around there with the iSeasmo.
• It is also possible to slightly heat the area with a hair dryer to loosen tough adhesive.
Translate
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 3
• Open the phone like a book and set the rear glass assembly aside.
• Disconnect the fingerprint sensor.
• Put down some 4 mm Tesa tape to act as replacement adhesive before reassembling your device.
• Remove the fingerprint sensor from the broken/scratched back glass and reconnect the fingerprint sensor pad to your new back glass before closing the device.
Translate
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 4
• Apply your new back glass assembly onto your phone. Apply some light force onto the back of the phone so that the adhesive sets.
Translate
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment

Special thanks to these translators:

fr en

100%

[deleted]

[deleted] is helping us fix the world! Want to contribute?
Start translating ›

Author

with 2 other contributors

cPix

Member since: 06/14/16

3,971 Reputation

8 Guides authored

Badges: 21

• 
• 
• 

+18 more badges

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview