Introduction

Follow the guide to replace touchscreen glass

Image 1/1:
  • Open the SD slot and remove the screw hidden under the sticker.

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • Use an opening pick to disengage the clips securing the back cover.

Add Comment

Image 1/3: Disconnect the touchscreen connector. Image 2/3: Disconnect the display connector. Image 3/3: Disconnect the display connector.
  • Carefully swing up the display assembly, still connected by the touchscreen and display ribbon cables.

  • Disconnect the touchscreen connector.

  • Disconnect the display connector.

Add Comment

Image 1/3: Remove the display. Image 2/3: Remove the display. Image 3/3: Remove the display.
  • Remove the 6 screws that secure the 2 metal stripes holding the display.

  • Remove the display.

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • Apply heat on the panel edges. Use an opening pick to separate the glass panel from the plastic frame.

Add Comment

Image 1/2: Image 2/2:
  • Remove any remaining adhesive and piece of glass to allow adhesive and glass panel replacement.

Add Comment

Conclusion

To assemble the device, follow these instructions in reverse order.

5 other people completed this guide.

Special thanks to these translators:

100%

These translators are helping us fix the world! Want to contribute?
Start translating ›

Smilzo

Member since: 11/09/2013

3,835 Reputation

28 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 32

Past 7 Days: 143

Past 30 Days: 539

All Time: 1,784