Fix Your Stuff Community Store

This translation is out of date: help update the translation or view the source guide.

Huawei Mate 9 Lite battery replacement

Written By: Malte Kerl (and 4 other contributors)
  • Comments: 0
  • Favorites: 0

Difficulty

Moderate

Steps

5

Time Required

30 minutes

Sections

1

Flags

3

Grammar Police

Grammar Police

Embrace your inner English teacher and help improve this guide's grammar!

Needs More Images

Needs More Images

A few more images would make this guide's procedures crystal clear.

Member-Contributed Guide

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

What you need

  1. Huawei Mate 9 Lite battery replacement, Batterie: step 1, image 1 of 1

    • Heat the back of the device (e.g. with a warm bottle).

    • Then use a suction cup to lift the back a bit and insert a pick into the gap. Guide the plectrum once around the smartphone and loosen the glue, then remove the back cover.

    • Note the cable for the fingerprint sensor.

    • The back is made of a quite flexible plastic. Thus, you cannot easily destroy the back

    • There is a sticker with the serial number on the back. This has to be removed so that the suction cup holds well.

    Translate

  2. Huawei Mate 9 Lite battery replacement: step 2, image 1 of 1

    • Loosen the two screws that fix the cable on the right above the battery.

    • Disconnect the cable and the cables attached to the same connector from the mainboard.

    • Use a non-conductive object for this.

    Translate

  4. Huawei Mate 9 Lite battery replacement: step 3, image 1 of 1

    • Now release the cable on the left side.

    • First, carefully bend the metal bracket that holds the cable on the right side a little to the side and then loosen the screw that holds the cable.

    • Then carefully pull the cable upwards.

    Translate

    • The battery is very firmly glued to the case.

    • Be careful when removing it!

    • I put the phone on a hot water bottle with the display facing down. This is not the best solution, but it works.

    Translate

    • To reassemble the smartphone, you first need to remove the adhesive residue that is present around the frame.

    • Then follow the last steps backwards.

    • Do not bend the metal bracket for the left cable back until you have already screwed the cable.

    Translate
Conclusion

Follow the instructions in reverse order to reassemble the device.

Special thanks to these translators:

de en

30%

oldturkey03

oldturkey03 is helping us fix the world! Want to contribute?
Start translating ›

Author

with 4 other contributors

Malte Kerl

Member since: 06/04/2022

121 Reputation

1 Guide authored

Badges: 2

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 10

All Time: 78