Echo Power Pruner 254 cc PPT2620 2019 Control Handle Assembly Replacement
Adam O'Camb and one other contributor
Last updated on Feb 21, 2020
Views: 2.2K
View statistics:
- Past 24 Hours:
- 1
- Past 7 Days:
- 17
- Past 30 Days:
- 106
- All Time:
- 2,223
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓Use this guide to remove the control handle assembly on an Echo Power Pruner 254 cc PPT2620 2019.
What you need
Tools
-
-
-
Pull the spark plug cap straight off of the spark plug.
Ask FixBot
-
-
-
-
-
Use a T25 Torx screwdriver to loosen (but not remove) the two screws clamping the main pipe assembly to the control handle.
-
-
-
To reassemble your device, follow these instructions in reverse order.
