Introduction
It's easy to test an infrared (IR) remote control using a mobile phone's camera (most phone cameras are sensitive to IR). This helps when debugging a gadget problem.
What you need
-
-
Place the remote control facing the camera lens Turn the camera on, and check that you can see the remote control's front face.
Ask FixBot
-
-
-
-
Press buttons on the remote control.
-
If you can see a light in the camera screen then the remote is functioning!
-
Note: this doesn't test that the data sent by the remote is correct.
-
Cancel: I did not complete this guide.
One other person completed this guide.
3 Guide Comments
What might be the problem if it is always blinking, but it stops when I press any of the buttons?
Coby TV-DVD 1350 remote that was bought second hand, if that helps.
Faulty electronics or push-button switches. You could try squirting in some contact cleaner
