Fix Your Stuff Community Store

How to set up the Newport HT70

Medical Equipment
Neither iFixit nor this repair guide is endorsed by or affiliated with the medical device manufacturer.

Introduction

For more information on setting up the ventilator, please refer to page 6-2 in the service manual.

  1. How to set up the Newport HT70, How to set up the Newport HT70: step 1, image 1 of 1

    • Plug the Pinch Release power cable into the power supply input in the bottom left corner of the device.

    • Ensure that the cord faces to the right of the plug.

    Edit

  2. How to set up the Newport HT70: step 2, image 1 of 1

    • Continue reference to the diagram, plug the AC power cord into the AC power adapter.

    • Proceed by plugging the AC power cord into a well-grounded outlet.

    Edit

  3. How to set up the Newport HT70: step 3, image 1 of 1

    • From here, you may want to connect optional accessories or hook up to a humidifier.

    • See the Operator’s manual for a more in-depth look at some of the accessory options.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 2 other contributors

Merek McGill

Member since: 04/07/20

520 Reputation

5 Guides authored

Badges: 7

+4 more badges

1 Guide Comment

Saludos, tengo una falla con un HT70 PLus… el ventilador no me lee el VT censado por el Sensor de Flujo proximal… quien me puede ayudar?

Ing. José C. Valdéz Mujíca - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 6

All Time: 359