Skip to main content

Introduction

During prolonged or heavy use, a snap can come off and get lost. Not to worry – a worn-out or defective snap on your rain pants a can easily be replaced. Replacement snaps often come with the product in a small bag. If you don’t have a replacement snap, you can pick one up in a fabric supplies store – they come in several shapes and sizes and fit almost anywhere. You will find more information about which buttons we have used and recommend under the point “Spare parts”.

Tools

Parts

  1. You’ll need a hammer, a snap tool and replacement snap fasteners (2 pieces for each side). Tip: In this example we used a set of Prym snaps which are widely available in German stores.
    • You’ll need a hammer, a snap tool and replacement snap fasteners (2 pieces for each side).

    • Tip: In this example we used a set of Prym snaps which are widely available in German stores.

    • Position the top of the snap on the front side of your fabric from above and the stud piece on the bottom, press them together with the snap tool and tap them firmly several times with a hammer.

    • Position the socket side on the front of your bottom fabric and place the back side of the socket piece on the back, press them together with the snap tool and tap them firmly several times with a hammer.

Conclusion

Finished! You did it.

Special thanks to these translators:

de en

100%

Daniel Schmid is helping us fix the world! Want to contribute?
Start translating ›

Daniel Schmid

Member since: 02/22/2016

327 Reputation

13 Guides authored

Team

Vaudesport Member of Vaudesport

Community

3 Members

92 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 4

Past 7 Days: 9

Past 30 Days: 35

All Time: 456