Introduction

This guide will walk you through how to change the paper and common problems and solutions associated with being low on paper.

Inspect to see if the paper tray is empty.
  • Inspect to see if the paper tray is empty.

Add Comment

Add some paper if there is none, if there is, realign the paper to fit on top of the gears so it feeds through properly.
  • Add some paper if there is none, if there is, realign the paper to fit on top of the gears so it feeds through properly.

Add Comment

Ensure that all paper is in the correct tray, the correct tray is on the upper deck of the printer.
  • Ensure that all paper is in the correct tray, the correct tray is on the upper deck of the printer.

Add Comment

Run the printer to verify it now prints. If it still does not, inspect the paper tray again.
  • Run the printer to verify it now prints. If it still does not, inspect the paper tray again.

Add Comment

Remove any paper that looks to be overloading the tray feeder. Sometimes there can be too much paper in the tray and it won't print because of this.
  • Remove any paper that looks to be overloading the tray feeder. Sometimes there can be too much paper in the tray and it won't print because of this.

Add Comment

Retry the print one last time, if it still fails, consider consulting a page to update drivers.
  • Retry the print one last time, if it still fails, consider consulting a page to update drivers.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Joe

Member since: 10/14/2011

1 Reputation

4 Guides authored

Team

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 2

All Time: 805