Skip to main content

Shop the Holiday Gift Guide
Free Shipping on Domestic Orders $75+

How to fix PS5 overheating

Views: 192K

View statistics:

Past 24 Hours:
224
Past 7 Days:
1,563
Past 30 Days:
4,138
All Time:
191,519
Comments: 16

16 guide comments.

Go to guide comments
Completed: 30

30 people have marked this guide "completed." Will you be next?

Favorites: 10

10 people have favorited (and subscribed to) this guide. Will you be next?

Time Required: 40 minutes - 1 hour
Difficulty: Moderate
Community-Contributed Guide

An awesome member of our community made this guide. It was not created by iFixit staff.

Needs Transcription

This guide is in video form only. Help make it more accessible by transcribing each action of the procedure into a separate step and adding photos.

How to fix PS5 overheating

Introduction

Go to step 1 ↓

Hello, Everyone, in this video guide, I going to show you how to disassemble PS5 and clean the fan and heatsink from dust. Over time, the radiator inside of the PlayStation 5 becomes clogged with dust, and the system overheats. To solve this problem, you need to clean your game console.

What you need

Tools

Video Overview

      • Backup PS5 if possible

      • Gracefully shutdown the PS5

      • Unplug all cables and move to a clean working area.

      • Gather required tools

      • TR8 Torx(security bit)

      • P1 Screw Driver

      • Magnetic Project Mat

      • Plastic prying tools and Spudger.

      Ask FixBot

      Add Comment

      • Remove Optical side cover

      • If the optical drive is closest to you, lift up on top left corner.

      • Clean accessible areas with a non-static brush, compressed-air, or vacuum.

      • When finished, flip over to remove PS logo side panel.

      Ask FixBot

      Add Comment

      • Remove cover by gently pulling up on corner by PS logo a sliding towards the Vertical Botton of PS5.

      • Clean area as much as possible

      • Now flip the ps5 back over to the optical bay side.

      Ask FixBot

      Add Comment

      • Using a spludger tool:

      • Carefully pry inlet grill from top-left to bottom right.

      Ask FixBot

      Add Comment

      • Remove Molex connection cover using flat end of plastic probe

      Ask FixBot

      Add Comment

      • Using two spludgers

      • Pry either side of the fan molex connector to disconnect.

      • TR8 Bit: Remove 4 x screws

      • 2x Screw w/ machine threads top-right and bottom-right (23.3mm)

      • 1x Short screw with coarse threads on bottom left (11.4mm)

      • 1x Long screw w/ coarse threads on top-left (31mm)

      • Remove fan cover

      • Remove fan assembly

      Ask FixBot

      Add Comment

      • If heavy accumulation of dust is present on heatsink, proceed with further disassembly.

      Ask FixBot

      Add Comment

      • Use P1 bit driver to remove 1 x Screw

      • Remove m.2 cover plate and set aside.

      Ask FixBot

      Add Comment

      • Disconnect 2x Molex connectors

      Ask FixBot

      Add Comment

      • Proceeding further will void your manufacturer warranty. Proceed at your own risk!

      • Remove stick to reveal TR8 bit head screw

      Ask FixBot

      Add Comment

      • TR8 Bit: Remove 11 x screws

      • These screws vary in sizes so pay attention to where they go.

      • Remove cover.

      Ask FixBot

      Add Comment

      • Use spudger to depress metal clip for ribbon cable connecting from the main unit to the optical drive.

      • The optical drive can now be removed and set aside.

      Ask FixBot

      Add Comment

      • Remove 3x Ribbon Cables

      • Remove 2 x uFL Wifi

      • RW & RB

      • FW & FB

      Ask FixBot

      Add Comment

      • Remove 41 X Torx Screws (Silver Screws)

      • Remove 1 X Torx Black Screw

      Ask FixBot

      Add Comment

      • Disconnect Ribbon Cable

      • Flip over

      • Remove 2 x Torx Screws (29.4mm)

      • Remove Cover

      Ask FixBot

      Add Comment

      • Remove Power Supply by pulling up

      Ask FixBot

      Add Comment

      • Follow these steps in reverse or follow above video.

      Ask FixBot

      Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

30 other people completed this guide.

Author

with

Arty

Member since: 10/27/19

34,682 Reputation

110 Guides authored

16 Guide Comments

Thanks for the great guide which I have been using with success. I wonder if you know specifically what compound (not pads) there is on the capacitors and ram under the shield. Thank you

Ander x - Reply Share

Thanks! Man that was alot of screws!

RadioShack SLO - Reply Share

Awesome video, and one that showed you how to put it back together!! much appreciated sir

Alex Blackwood - Reply Share

This was my second time tearing down the PS5 to clean it... and it was still a very annoying process.

It was made much easier with this guide, though. Thanks for all the work you put in to making it! Much appreciated.

Matthew D. H. - Reply Share

Now it's my 3rd time using this guild to tear down the PS5. Greatly appreciate the time & effort that went to in making this guide... It's the gift that keeps on giving!

Matthew D. H. - Reply Share

Add Comment

View Statistics:

Past 24 Hours: 224

Past 7 Days: 1,563

Past 30 Days: 4,138

All Time: 191,519