Introduction

The grille is the part of the microphone that you speak into. Keeping the grille clean ensures that your sound quality is at its best.

Parts

No parts required.

  1. Hold the microphone just below the grille with one hand while using your other hand to rotate the grille clockwise to remove.
    • Hold the microphone just below the grille with one hand while using your other hand to rotate the grille clockwise to remove.

    Add Comment

  2. Completely unscrew the grille and slide it off of the top of the microphone. The unprotected microphone is delicate, so place it somewhere safe while you follow the next steps.
    • Completely unscrew the grille and slide it off of the top of the microphone. The unprotected microphone is delicate, so place it somewhere safe while you follow the next steps.

    Add Comment

    • Put two drops of dish soap into a cup.

    • Add water to cup until half full.

    Add Comment

    • Place the grille in the solution of soap and water.

    • Let the grille soak for half an hour.

    Add Comment

    • Remove the grille from the cup and rinse it with cold water.

    • Allow the grille to air dry.

    • Make sure the grille and the foam inside it are completely dry before placing it back on the microphone.

    Carefully remove the THIN foam filter Inside the grill. Wash this in the 2 drops of Dawn water solution.

    Gently rinse in cool running water, blot dry and allow to dry. Reinstall into the grill after they both have dried.

    Doug - Reply

Finish Line

5 other people completed this guide.

nat coll

Member since: 09/27/2012

372 Reputation

14 Guides authored

Team

Cal Poly, Team 7-53, Forte Fall 2012 Member of Cal Poly, Team 7-53, Forte Fall 2012

CPSU-FORTE-F12S7G53

5 Members

18 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 27

Past 30 Days: 141

All Time: 6,145