Introduction

This guide will explain how to do simple maintenance on your Avanti 308YWT evaporator tray. This involves simply removing and cleaning the tray. If the evaporator tray is not cleaned it could cause the fridge to start leaking, which could eventually damage the floor.

Before starting, unplug the refrigerator.
  • Before starting, unplug the refrigerator.

Go to the bottom of the back side of the refrigerator and locate the cut out where the compressor and evaporator are stored.
  • Go to the bottom of the back side of the refrigerator and locate the cut out where the compressor and evaporator are stored.

New Battery = Faster iPhone
Fix Kits starting at $16.99
Remove the evaporator tray by simply pulling up and out the tray. make sure that none of the liquid spills.
  • Remove the evaporator tray by simply pulling up and out the tray. make sure that none of the liquid spills.

The evaporator tray might have ice build up on it. You can remove this ice by pouring warm water on the tray. After the ice is melted, clean the tray with warm water and soap. The evaporator tray might have ice build up on it. You can remove this ice by pouring warm water on the tray. After the ice is melted, clean the tray with warm water and soap.
  • The evaporator tray might have ice build up on it. You can remove this ice by pouring warm water on the tray. After the ice is melted, clean the tray with warm water and soap.

Dry and reinsert the tray.
  • Dry and reinsert the tray.

Plug the refrigerator back in.
  • Plug the refrigerator back in.

Conclusion

To reassemble your device, follow these instructions in reverse order.

5 other people completed this guide.

Seye

Member since: 10/11/2014

299 Reputation

1 Guide authored

Team

USF Tampa, Team 1-38, Donnelly Fall 2014 Member of USF Tampa, Team 1-38, Donnelly Fall 2014

USFT-DONNELLY-F14S1G38

1 Member

1 Guide authored

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 7

All Time: 766