Introduction

This guide will show you how to clean the exterior side of the surface glass.

Tools

Parts

No parts required.

Image 1/3: After loosening the screws, pull the serial port out. Image 2/3: After loosening the screws, pull the serial port out. Image 3/3: After loosening the screws, pull the serial port out.
  • Loosen the screws on the serial port by turning them counter clockwise by hand.

  • After loosening the screws, pull the serial port out.

Add Comment

Image 1/3: Pull lid straight up to remove it from the scanner. Image 2/3: Pull lid straight up to remove it from the scanner. Image 3/3: Pull lid straight up to remove it from the scanner.
  • Lift lid to its vertical position.

  • Pull lid straight up to remove it from the scanner.

Add Comment

Image 1/1:
  • Using a soft lint-free cloth clean the surface glass of dust, finger prints, and other debris.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Steven Shaginyan

Member since: 10/12/2011

45 Reputation

4 Guides authored

Team

Cal Poly, Team 6-9, Regan Fall 2011 Member of Cal Poly, Team 6-9, Regan Fall 2011

CPSU-REGAN-F11S6G9

2 Members

11 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

All Time: 1,677