Introduction

To perform maintenance on the motorbike, tools are required. There is a storage compartment located on the motorbike that will hold the necessary tools. You can also add to this arsenal by adding others.

NOTE: The tool box is located on the left side of the bike (opposite the tail pipe)

Remove the plastic covering, located on the left side of the bike, by pulling the piece straight off the bike.
  • Remove the plastic covering, located on the left side of the bike, by pulling the piece straight off the bike.

Add Comment

The tool box is located under the panel. Using the key to the motorbike, unlock the tool box. Remove the plastic bag inside holding the tools needed for basic maintenance for the motorbike.
  • The tool box is located under the panel.

  • Using the key to the motorbike, unlock the tool box.

  • Remove the plastic bag inside holding the tools needed for basic maintenance for the motorbike.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

6 other people completed this guide.

Dazarene Cascio

Member since: 10/07/2014

514 Reputation

2 Guides authored

Team

USF Tampa, Team 1-7, Donnelly Fall 2014 Member of USF Tampa, Team 1-7, Donnelly Fall 2014

USFT-DONNELLY-F14S1G7

1 Member

2 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 8

Past 30 Days: 62

All Time: 870