Fix Your Stuff Community Store

How to Repair the Jump Ring on a Mask Holder

Introduction

Mask holders are important to keep our masks clean. You can use them while eating or anytime you need to take off your mask. The daily use of the mask holder and changing the mask can cause damage. The most common breakage happens when the jump ring gets pulled apart and the chain slips out. This guide will show you how easy it is to repair it.

What you need

  1. How to Repair the Jump Ring on a Mask Holder, How to Repair the Jump Ring on a Mask Holder: step 1, image 1 of 1

    • Remove the broken or opened jump ring from your mask holder.

    Edit

  2. How to Repair the Jump Ring on a Mask Holder: step 2, image 1 of 1

    • Hold needle nose pliers with one hand and the jump ring in the other.

    • Make sure you have good light so you can see clearly.

    Edit

  4. How to Repair the Jump Ring on a Mask Holder: step 3, image 1 of 2 How to Repair the Jump Ring on a Mask Holder: step 3, image 2 of 2

    • Use the pliers to open the jump ring carefully.

    Edit

  5. How to Repair the Jump Ring on a Mask Holder: step 4, image 1 of 1

    • Reattach the chain to the jump ring.

    Edit

  6. How to Repair the Jump Ring on a Mask Holder: step 5, image 1 of 1

    • Use the pliers to close the jump ring.

    Edit

  7. How to Repair the Jump Ring on a Mask Holder: step 6, image 1 of 2 How to Repair the Jump Ring on a Mask Holder: step 6, image 2 of 2

    • Make sure the ring is closed tightly so the mask holder stays secure.

    Edit
Finish Line

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 9

All Time: 292