Introduction

Fixing the ON/OFF Button. After some years in use toothbrush is not turning on at all or only if the button is pressed very hard.

Parts

No parts required.

Gently remove the rubber-button with a small screwdriver and place a small drop of hotglue on the rubber. Let the glue cool down and put the rubber back in place.
  • Gently remove the rubber-button with a small screwdriver and place a small drop of hotglue on the rubber. Let the glue cool down and put the rubber back in place.

Add Comment

Deck the Halls
With tools and Fix Kits
Conclusion

Arbeite die Schritte in umgekehrter Reihenfolge ab, um dein Gerät wieder zusammenzubauen.

One other person completed this guide.

Konzentrat

Member since: 07/14/2016

134 Reputation

1 Guide authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 7

Past 30 Days: 20

All Time: 496