Introduction

If you're tired of your halogen headlights or fog lights and want to upgrade to something with a better output, try installing an HID Conversion Kit.

Tools

No tools required.

Parts

  1. Open the hood.
    • Open the hood.

    • Locate the back of the headlights and remove the bolts holding the headlight housing.

    Add Comment

  2. Unplug the stock harness and remove the headlights.
    • Unplug the stock harness and remove the headlights.

    Add Comment

    • Remove battery negative terminal.

    • Remove headlight cover and remove factory halogen bulb.

    Add Comment

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Take out the HID bulb from the plastic shell and remove the circular plastic piece.

    • Remember not to touch the HID bulb glass!

    • If you accidentally touch it, you can clean it with some rubbing alcohol.

    Add Comment

    • Screw in the HID bulb back into the headlight housing.

    • Connect the wires of the HID bulb to the ballast and then connect the HID ballast back to the stock harness.

    Add Comment

    • Before you mount the ballast, test the HID light to make sure it lights up.

    • If not, turn the adapter wire 180 degrees.

    • Mount the HID ballast with zip ties.

    Add Comment

    • Put everything (like the headlight housing) back.

    • Enjoy!

    Add Comment

Conclusion

Enjoy your new HID Conversion Kit and upgraded headlights or fog lights.

3 other people completed this guide.

Eric Wu

Member since: 01/21/2015

2,462 Reputation

23 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 35

Past 30 Days: 170

All Time: 6,714