Introduction
This repair guide is a step-by-step of instructions to ensure you are using the correct materials and tools to fix your Delta 5-Function Showerhead Model 75554. This showerhead has a major leak in it, which I have found that it is where is screws onto the shower pipe itself. The reasoning behind this guide is that it gets very slippery when I walk into my shower because of how bad, and often the head is leaking.
What you need
-
-
-
Unscrew the head of the shower from the pipe with a pipe wrench.
Ask FixBot
-
-
-
Fill a large bowl with equal parts hot water and white distilled vinegar to get rid of hard water build up.
-
-
-
-
With the tip of a pocketknife, pick out the rubber, black washer in the attachment.
-
Using your fingertips press a new 1" black rubber washer into the head attachment. The new washer will allow water to flow correctly with more pressure.
-
-
-
Wrap Teflon tape around the legs of the spout about 3 times to ensure that it will screw on tight when the head is put back on.
-
-
-
Twist the shower head back onto the pipe and tighten it with the pipe wrench.
-
-
Cancel: I did not complete this guide.
One other person completed this guide.
Team
Eastern Washington University, Team S25-G4, Crane Spring 2019 Member of Eastern Washington University, Team S25-G4, Crane Spring 2019
EWU-CRANE-S19S25G4
3 Members
36 Guides authored
