Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Introduction

If your silverware starts to bend, there's no need to go out and buy more. This guide will show you a quick fix to repairing your silverware and bending it back to its original shape.

  1. First, clean with soap and water all of the bent silverware. First, clean with soap and water all of the bent silverware.
    • First, clean with soap and water all of the bent silverware.

  2. Take the pot and fill it halfway with water.
    • Take the pot and fill it halfway with water.

    • Put the pot on the stove and heat the water till it's boiling.

  3. Place the bent silverware in the water for at least one minute.
    • Place the bent silverware in the water for at least one minute.

  4. Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits

    Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits
  5. After the minute is over, carefully pull out all of the silverware using pliers.
    • After the minute is over, carefully pull out all of the silverware using pliers.

  6. Dry off the silverware with either paper or cloth towels. Be careful not to burn yourself.
    • Dry off the silverware with either paper or cloth towels. Be careful not to burn yourself.

  7. Use tools such as pliers, a hard surface, rulers, and/or hammers to reshape silverware as desired. Use tools such as pliers, a hard surface, rulers, and/or hammers to reshape silverware as desired.
    • Use tools such as pliers, a hard surface, rulers, and/or hammers to reshape silverware as desired.

  8. When your done bending the silverware to its desired shape, let the silverware cool down to stay in that shape.
    • When your done bending the silverware to its desired shape, let the silverware cool down to stay in that shape.

Finish Line

One other person completed this guide.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 11

Past 30 Days: 27

All Time: 243