Introduction

Use this guide to repair the power supply with a Phillips head screwdriver, a wrench, and pliers. These tools will help secure the screw holding the wire.

First, to remove the plastic bracket, turn toaster oven on its side.
  • First, to remove the plastic bracket, turn toaster oven on its side.

Add Comment

Use Phillips head screwdriver and wrench to remove screw and nut securing the plastic bracket.
  • Use Phillips head screwdriver and wrench to remove screw and nut securing the plastic bracket.

Add Comment

Black Friday
Broken doesn't stand a chance.
Use Phillips head screwdriver and pliers to remove screw and nut securing transformer.
  • Use Phillips head screwdriver and pliers to remove screw and nut securing transformer.

Add Comment

If the wire gets pulled out of the transformer, reinsert it.
  • If the wire gets pulled out of the transformer, reinsert it.

  • Use a small flathead screwdriver to secure the screw that holds the wire in place.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Tony Wang

Member since: 10/05/2012

64 Reputation

5 Guides authored

Team

Cal Poly, Team 6-35, Regan Fall 2012 Member of Cal Poly, Team 6-35, Regan Fall 2012

CPSU-REGAN-F12S6G35

4 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 5

All Time: 634