iPod Nano 2nd Generation Top Bezel Replacement
iRobot and 2 other contributors
Last updated on Mar 24, 2020
Views: 20K
View statistics:
- Past 24 Hours:
- 6
- Past 7 Days:
- 26
- Past 30 Days:
- 104
- All Time:
- 20,308
Comments: 2
2 guide comments.
Go to guide commentsCompleted: 12 13
12 people have marked this guide "completed." Will you be next?
13 people have marked this guide "completed." Including you — great job!
Favorites: 4 5
4 people have favorited (and subscribed to) this guide. Will you be next?
5 people have favorited (and subscribed to) this guide — including you!
Introduction
Go to step 1 ↓The plastic part on the top of the iPod.
What you need
-
-
-
-
Carefully insert an iPod opening tool in the seam between the metal casing and white plastic top.
-
Lift the top bezel off the iPod. It's glued on using a mild adhesive, so some force may be required.
-
Ask FixBot
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
12 other people completed this guide.
2 Guide Comments
But how do I install it on? Do I just push it back? I want to fix mine but it doesn't even have the top part anymore, or the hold switch
