Introduction

Bring life back to your Apple Watch with a brand new, out of the box look following these steps. This guide instructs you to remove scratches from the stainless steel casing of an apple watch. It is intended to clean scratches off safely without damaging any sensitive parts.

Parts Needed

1x Pair of rubber gloves

1x Microfiber Cloth

1x Cape Cod Polishing Cloth

Flip  the watch over so it is face down. Flip  the watch over so it is face down.
  • Flip the watch over so it is face down.

Add Comment

Remove the straps by pressing the button adjacent to each side and sliding the band right out. Remove the straps by pressing the button adjacent to each side and sliding the band right out. Remove the straps by pressing the button adjacent to each side and sliding the band right out.
  • Remove the straps by pressing the button adjacent to each side and sliding the band right out.

Add Comment

Clean the watch with a microfiber cloth.
  • Clean the watch with a microfiber cloth.

  • Make sure all smudges are removed at this point.

Add Comment

Put on Gloves. Using a polishing cloth, which is already soaked with polishing cream, rub one side of the watch back and forth. Repeat on each side of the watch. When using the polishing cloth, do NOT go directly over the microphone or the speaker.
  • Put on Gloves. Using a polishing cloth, which is already soaked with polishing cream, rub one side of the watch back and forth.

  • Repeat on each side of the watch.

    • When using the polishing cloth, do NOT go directly over the microphone or the speaker.

    • If the polishing cloth begins to turn black while you are wiping, do not be alarmed. The blackness is just layers of dirt coming off the watch.

Add Comment

Grab your microfiber cloth and go over the same area that you previously wiped until the residue is gone and you have restored the side to it’s previous mirror finish.
  • Grab your microfiber cloth and go over the same area that you previously wiped until the residue is gone and you have restored the side to it’s previous mirror finish.

  • Repeat on each side of the watch.

Add Comment

After the watch has been restored, slide the straps back into place (you will feel a click). After the watch has been restored, slide the straps back into place (you will feel a click).
  • After the watch has been restored, slide the straps back into place (you will feel a click).

Add Comment

Conclusion

Congratulations! You have finished buffing your Apple watch!

2 other people completed this guide.

Goose

Member since: 07/31/2017

161 Reputation

1 Guide authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 3

Past 7 Days: 26

Past 30 Days: 147

All Time: 1,380